Chemical and Physical Analysis of Drinking Water from Shallow Wells and Bore Holes in Thovalai and Vilavancode Taluk

Authors

  • Dr. Amalraj Ambrose

  • A.M. Alice Margret

shallow well, bore holes, thovalai taluk, physico-chemical parameters

Abstract

A study was conducted in Thovalai and Vilavancode Taluks in Kanyakumari District of Tamil Nadu to evaluate the Status of drinking water from shallow wells and bore-holes with respect to different physic-chemical parameter Temperature, pH, turbidity, alkalinity, hardness, salinity, fluoride, chloride total dissolved solids, dissolved oxygen, BOD, electrical conductivity total nitrogen, nitrate, sulphate ,ammonia, phosphate, total phosphorus, sodium, potassium and oxidation and reduction potential water samples were collected from different places from the taluks. Results reveal that almost all the Physic-Chemical parameter including the elemental investigations of the shallow wells and bore-holes have values within the range of permissible levels for drinking water. It was found that most of the parameters are within the permissible levels as described by WHO (1984).

Downloads

How to Cite

Chemical and Physical Analysis of Drinking Water from Shallow Wells and Bore Holes in Thovalai and Vilavancode Taluk. (2015). Global Journal of Science Frontier Research, 15(B1), 1-8. https://www.journalofscience.org/index.php/GJSFR/article/view/1480

References

(2005) APHA -AWWA -WPCF, standard methods for the examination of water and waste water.

G Ashvin, Rajaram Godghate, Sawani, D Shoba (2013) Unknown Title. 2(5), 95-97.

Mr. Sargar, Dr. Thakare (2024) Assessment Of Some Selected Physico-Chemical Parameters Of Water From Niwali Reservoir, Tahsil Jintur, Dist. Parbhani (M.S.) India..

(1983) ISI, Indian Standard Specification for drinking water, ISIO500.

V Mariappan, P Prabakaran, Rajan International journal of Theoretical & Applied sciences of water quality parameters of Kerwa Dam for drinking suitability.

R Trivedi, P Goel (1984) Chemical and Biological methods for water pollution status.

Who (1963) Water quality for drinking: who guidelines. 1, 56.

(1984) Water quality for drinking: who guidelines. 1.

D Shah, P Trivedi (2006) Pysico-Chemical Analysis of Bore Wells and Open Wells Drinking Water of, Kathalal Region. 6(2), 287-290.

V Unknown Title.

Chemical and Physical Analysis of Drinking Water from Shallow Wells and Bore Holes in Thovalai and Vilavancode Taluk

Published

2015-03-21

How to Cite

Chemical and Physical Analysis of Drinking Water from Shallow Wells and Bore Holes in Thovalai and Vilavancode Taluk. (2015). Global Journal of Science Frontier Research, 15(B1), 1-8. https://www.journalofscience.org/index.php/GJSFR/article/view/1480