Mechanical Pretreatment of Polymer Melts: Critical Aspects and New Rheological Investigations on a Linear and a Long-Chain Branched Polypropylene

Authors

  • Jean Pierre Ibar

Abstract

defines how to calculate the %

How to Cite

Mechanical Pretreatment of Polymer Melts: Critical Aspects and New Rheological Investigations on a Linear and a Long-Chain Branched Polypropylene. (2022). Global Journal of Science Frontier Research, 22(19), 21-32. https://www.journalofscience.org/index.php/GJSFR/article/view/102518

References

Helmut Münstedt (2021) Mechanical pretreatment of polymer melts: Critical aspects and new rheological investigations on a linear and a long-chain branched polypropylene. 65(5), 871-885. https://doi.org/10.1122/8.0000287

Ibar J.P.book (2019) The Physics of Polymer Interactions. A Novel Approach. Application to Rheology and Processing.

J. Ibar, H. Münstedt (2019) which led these two authors to enter into a lengthy correspondence, covering chapter after chapter between 9/22/2020 and 2/17/2021.Münstedt.

J. Ibar Methods to Alter Entanglements prior to.

J. Ibar Viewing Entanglements as a Blended Phase in.

J. Ibar (1997) Could Entanglements be Viewed as a Blended Phase?. 42(1), 527.

J. Ibar (1997) Melt Viscosity Reduction of Plastics by Vibration During Filling in Injection Molding.

J. Ibar (1997) Smart Processing of Plastics Through Vibration Controlled Shear-Thinning and Orientation. 79, 223-248. https://doi.org/10.1115/imece1997-0632

J. Ibar (1998) Control of Performance of Polymers and Their Blends Through Melt Vibration Technology. A Review of Science, Technology and Perspectives.

J. Ibar (1998) Control of Polymer Properties by Melt Vibration Technology. A Review. 38(1), 1-20. https://doi.org/10.1002/pen.10161

J. Ibar (1999) Viewing Entanglements as a two-phase system in Polymeric Materials. 225.

J. Ibar (1999) Control of Viscosity of Polymer Melts Prior to Molding by Disentanglement Methods. 2, 1798-1802.

J. Ibar Time Dependence of Shear-Thinning of Polymer Melts.

J. Ibar (2001) Extrusion of Polymer Melts under Intensive Shear-Thinning Inducing Lower Pressure and Temperature Requirements.

J. Ibar (2001) Reduction of Viscosity of Polymer Melt by Shear-Thinning and Disentanglement: Rheological Criteria and Commercial Perspectives. 482.

J. Ibar, S. Morneau (2003) Characterization of Polymer Resins Produced by Melt Disentanglement. 818.

J. Ibar (2004) Disentanglement of Polymer Melts. 579.

J. Ibar (2004) Flow Simulation for Polymer Melt under Disentanglement Conditions. 1071.

S. Morneau, J. Ibar Properties of Injection Moldable Blends of (Latex/Wood Flour Recipes) and Polypropylene.

J. Ibar (2005) Control of Thixotropicity of Polymer Melts by Disentanglement Processing. 10370.

J. Ibar, T. Hicks, S. Morneau, R. Amba (2005) PC Flow and Mechanical Performance from Disentanglement Processing. 101381.

J. Ibar, S. Morneau, T. Hicks, R. Amba (2005) Exfoliation of Nanoclays in Concentrates of LDPE. 101382.

J. Ibar, T. Hicks, S. Morneau (2005) PET/PC, PC/PC Properties from Disentanglement Processing. 101117.

J. Ibar (2006) The Physical Properties Advantages Gained when Alloying/Blending Polycarbonate with Polymethylmethacrylate. 104327.

J. Ibar (1999) Viscosity Control for Molten Plastics Prior to Molding. 5, 495.

J. Ibar (2001) Method and Apparatus to control Viscosity of Molten Plastics prior to a Molding Operation. 210.

J. Ibar Process to Disperse Thermally Sensitive Additivesand Nanoclays into Polymer Melts.

J. Ibar A Method for Controlling the Molecular Weight and Fluidity of Polymers.

J. Ibar Polymer Blends.

Ibar J.P Dispersion of Nanoclays in Polymer Melts.

J. Ibar Process for the Control of Flow Properties of Polymers.

Ibar J.P Process for the Preparation of Polymers from Polymer Slurries.

J. Ibar (2005) Process for Incorporating Substances into Polymeric Materials in a Controllable Manner.

J. PIbar (2009) The Great Myths of Polymer Melt Rheology, Part I: Comparison of Experiment and Current Theory. 48, 1143-1189.

J. Ibar (2010) The Great Myths of Rheology, Part II: Transient and Steady-State Melt Deformation: The Question of Melt Entanglement Stability. 49, 1148-1258.

J. Ibar (2013) The Great Myths in Polymer Rheology, Part III: Elasticity of the Network of Entanglements. 52, 222-308.

J. Ibar (2013) Processing polymer melts under Rheo- Fluidification flow conditions: Part 1. Boosting shearthinning by adding low frequency non-linear vibration to induce strain softening. 52, 1-35.

J. Ibar (2012) Processing Polymer Melts under Rheo-Fluidification Flow Conditions, Part 2: Simple Flow Simulations. 52, 1-20.

J. Ibar (2012) Mixing Polymers under Rheo‐Fluidification Conditions. 321-322(1), 30-39. https://doi.org/10.1002/masy.201251105

(1996) La mise en forme des matieres plastiques.

S. Bourrigaud (2004) Etude de la modification des proprietes rheologiques induite par l'ecoulement: application a l'extrusion couchage.

J. Ibar (2014) 12 Lectures in Polymer Physics Applied to Processing.

Jiaxin Fu, Yingxiong Wang, Kaizhi Shen, Qiang Fu, Jie Zhang (2019) Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state. 57(10), 598-606. https://doi.org/10.1002/polb.24816

D. Kong, M. Yang, X. Zhang, Z. Du, Q. Fu, X. Gao, J. Gong Control of Polymer Properties by Entanglement: A Review.

J. Ibar (2022) Dual-Phase Depolarization Analysis.

J. Ibar (2023) Dual-Phase Rheology.

T. Hutley Review of J.P. Ibar's book "The Physics of Polymer Interactions. A Novel Approach. Applications to Rheology and Processing. https://www.amazon.co.uk/review/RT25ODNH8F304/ref=pe_1572281_66412651_cm_rv_eml_rv0_rv

Mechanical Pretreatment of Polymer Melts: Critical Aspects and New Rheological Investigations on a Linear and a Long-Chain Branched Polypropylene

Published

2022-07-01

How to Cite

Mechanical Pretreatment of Polymer Melts: Critical Aspects and New Rheological Investigations on a Linear and a Long-Chain Branched Polypropylene. (2022). Global Journal of Science Frontier Research, 22(19), 21-32. https://www.journalofscience.org/index.php/GJSFR/article/view/102518