On the Dependence of the Fill Factor of the Solar Module on the Temperature

Authors

  • Aleksandr Ivanovich Kanareykin

solar energy, solar battery, fill factor, temperature factor

Abstract

The work is devoted to the conversion and use of solar energy in solar panels. The article shows that one of the clue parameters for evaluating the efficiency of solar panels and photovoltaic cells, the fill factor decreases with increasing temperature. The issue of reducing the influence of the temperature factor on the efficiency of solar panels is also considered. Based on the research, the conclusion is given that the idling voltage should be as high as possible.

How to Cite

On the Dependence of the Fill Factor of the Solar Module on the Temperature. (2021). Global Journal of Science Frontier Research, 21(26), 1-4. https://doi.org/10.34257/GJSFRAVOL21IS3PG1

References

K. Ryazanov (2009) V Prospects for the development of solar energy // CABLE-news. 81.

A. Kanareykin (2021) I Consideration of the solution of one of the problems of heat transfer using the method of dimensions // SCIENCE IN MODERN SOCIETY: REGULARITIES AND DEVELOPMENT TRENDS Collection of articles following the results of the International Scientific and Practical Conference. 42-44.

Saleh Babaa, Matthew Armstrong, Volker Pickert (2014) Overview of Maximum Power Point Tracking Control Methods for PV Systems. 02(08), 59-72. https://doi.org/10.4236/jpee.2014.28006

H. Djeghloud, O. Guellout, M. Larakeb, O. Bouteldja, S. Boukebbous, A. Bentounsi (2014) Practical study of a laboratory undersized grid-connected PV system. 2014, 618-623. https://doi.org/10.1109/isgt-asia.2014.6873863

A. Dolara, R. Faranda, S. Leva (2009) Energy Comparison of Seven MPPT Techniques for PV Systems. 01(03), 152-162. https://doi.org/10.4236/jemaa.2009.13024

C. Dorofte, U. Borup, F. Blaabjerg (2005) A Combined twomethod MPPT control scheme for grid-connected photovoltaic systems European Conference on Power Electronics and Applications. 2005, 10 pp.-P.10. https://doi.org/10.1109/epe.2005.219714

Mohammed Elgendy, Bashar Zahawi, David Atkinson (2012) Assessment of perturb and observe MPPT algorithm implementation techniques for PV pumping applications IEEE Transactions on Sustainable Energy, vol 3, no. 3(1), 21-33. https://doi.org/10.1109/tste.2011.2168245

Trishan Esram, Patrick Chapman (2007) Comparison of photovoltaic array maximum power point tracking techniques IEEE Transactions on Energy Conversion, vol 22, no. 22(2), 439-449. https://doi.org/10.1109/tec.2006.874230

Femia N, Granozio D, Petrone G, Spaguuolo G, Vitelli M (2006) Optimized one-cycle control in photovoltaic grid connected applications IEEE Trans Aerosp Electron Syst., 2006, vol. 3, 954-972. https://doi.org/10.1109/taes.2006.248205

Kanareykin I. (2021) On the correctness of calculating the Fill Factor of the solar module. 808.

On the Dependence of the Fill Factor of the Solar Module on the Temperature

Published

2021-08-30

How to Cite

On the Dependence of the Fill Factor of the Solar Module on the Temperature. (2021). Global Journal of Science Frontier Research, 21(26), 1-4. https://doi.org/10.34257/GJSFRAVOL21IS3PG1